IBIS Vertex SP Semi-Automatic Pallet Wrapper
Includes UK delivery and installation.
Contact us for unbeatable quality and an unbeatable low price on 01639 890609
IBIS C-One Vertex SP maintains characteristics and qualities of C-One Vertex, but thanks to the “don’t get off” system, it works by itself: the operator brings the pallet that has to be wrapped under the machine and, without getting off the forklift, starts the wrapping cycle with a remote control.
The operator does not have to get off the forklift to tie the film to the pallet at the beginning of cycle or to cut it at the end. This brings a time reduction and a decrease of injure risks.
The pre-stretch carriage is supplied with a roping system, in order to make a film band or a film rope. These cycles can be used to get a very strong tightness on heavy pallets. C-One Vertex SP is the best solution for very light and very heavy pallets and for high outputs.
Technical Details
Height: 3100 mm
Width: 3070 mm
Length: 4600 mm
Turntable height: mm
Weight: 900 Kg
Power supply: 230 VAC VAC 3PH+N
Power absorption: 2,5 kW
Specifications
Automatic cycle for film hooking, pallet wrapping, film cold cutting and film hot sealing
Air device to blow up the film tail
Electronic printed circuit board for the management of the cycle
Frequency controller for carriage speed adjustment
Frequency controller for arm rotation speed adjustment
Maximum height of pallet: 2500 mm
Max size of the pallet: 1200x1200 mm
Power pre-stretch carriage
Photocell to detect the pallet height
Safety stop loop at the base of the mast
Stop at 0 position
Power board IP54
3 password levels (including lock password)
Adjustable parameters by the control panel without password: cycle selection, bottom laps, top laps, topsheet cycle parameters, rotation speed, carriage ascent speed, carriage descent speed, film tension, starting wrapping height
3 working cycles: ascent/descent; topsheet; layers
Storage of 32 end user programs
3 working ways: semimanual, semiautomatic, fixed height
Strenghtening operation
Acoustic warning at the cycle beginning and stop
Autodiagnostic
Wrapped pallet counter
Receiver for infrared/radio remote control
Powder coating
Braked arm at the end of the cycle
Product Options (Available on request)
Adjustable power pre-stretch
3000 mm max wrapping height
Remote control
Photocell for dark loads
Mechanical system to brake roll containers
Safety fences
Includes UK delivery and installation.
Contact us for unbeatable quality and an unbeatable low price on 01639 890609
IBIS C-One Vertex SP maintains characteristics and qualities of C-One Vertex, but thanks to the “don’t get off” system, it works by itself: the operator brings the pallet that has to be wrapped under the machine and, without getting off the forklift, starts the wrapping cycle with a remote control.
The operator does not have to get off the forklift to tie the film to the pallet at the beginning of cycle or to cut it at the end. This brings a time reduction and a decrease of injure risks.
The pre-stretch carriage is supplied with a roping system, in order to make a film band or a film rope. These cycles can be used to get a very strong tightness on heavy pallets. C-One Vertex SP is the best solution for very light and very heavy pallets and for high outputs.
Technical Details
Height: 3100 mm
Width: 3070 mm
Length: 4600 mm
Turntable height: mm
Weight: 900 Kg
Power supply: 230 VAC VAC 3PH+N
Power absorption: 2,5 kW
Specifications
Automatic cycle for film hooking, pallet wrapping, film cold cutting and film hot sealing
Air device to blow up the film tail
Electronic printed circuit board for the management of the cycle
Frequency controller for carriage speed adjustment
Frequency controller for arm rotation speed adjustment
Maximum height of pallet: 2500 mm
Max size of the pallet: 1200x1200 mm
Power pre-stretch carriage
Photocell to detect the pallet height
Safety stop loop at the base of the mast
Stop at 0 position
Power board IP54
3 password levels (including lock password)
Adjustable parameters by the control panel without password: cycle selection, bottom laps, top laps, topsheet cycle parameters, rotation speed, carriage ascent speed, carriage descent speed, film tension, starting wrapping height
3 working cycles: ascent/descent; topsheet; layers
Storage of 32 end user programs
3 working ways: semimanual, semiautomatic, fixed height
Strenghtening operation
Acoustic warning at the cycle beginning and stop
Autodiagnostic
Wrapped pallet counter
Receiver for infrared/radio remote control
Powder coating
Braked arm at the end of the cycle
Product Options (Available on request)
Adjustable power pre-stretch
3000 mm max wrapping height
Remote control
Photocell for dark loads
Mechanical system to brake roll containers
Safety fences
Includes UK delivery and installation.
Contact us for unbeatable quality and an unbeatable low price on 01639 890609
IBIS C-One Vertex SP maintains characteristics and qualities of C-One Vertex, but thanks to the “don’t get off” system, it works by itself: the operator brings the pallet that has to be wrapped under the machine and, without getting off the forklift, starts the wrapping cycle with a remote control.
The operator does not have to get off the forklift to tie the film to the pallet at the beginning of cycle or to cut it at the end. This brings a time reduction and a decrease of injure risks.
The pre-stretch carriage is supplied with a roping system, in order to make a film band or a film rope. These cycles can be used to get a very strong tightness on heavy pallets. C-One Vertex SP is the best solution for very light and very heavy pallets and for high outputs.
Technical Details
Height: 3100 mm
Width: 3070 mm
Length: 4600 mm
Turntable height: mm
Weight: 900 Kg
Power supply: 230 VAC VAC 3PH+N
Power absorption: 2,5 kW
Specifications
Automatic cycle for film hooking, pallet wrapping, film cold cutting and film hot sealing
Air device to blow up the film tail
Electronic printed circuit board for the management of the cycle
Frequency controller for carriage speed adjustment
Frequency controller for arm rotation speed adjustment
Maximum height of pallet: 2500 mm
Max size of the pallet: 1200x1200 mm
Power pre-stretch carriage
Photocell to detect the pallet height
Safety stop loop at the base of the mast
Stop at 0 position
Power board IP54
3 password levels (including lock password)
Adjustable parameters by the control panel without password: cycle selection, bottom laps, top laps, topsheet cycle parameters, rotation speed, carriage ascent speed, carriage descent speed, film tension, starting wrapping height
3 working cycles: ascent/descent; topsheet; layers
Storage of 32 end user programs
3 working ways: semimanual, semiautomatic, fixed height
Strenghtening operation
Acoustic warning at the cycle beginning and stop
Autodiagnostic
Wrapped pallet counter
Receiver for infrared/radio remote control
Powder coating
Braked arm at the end of the cycle
Product Options (Available on request)
Adjustable power pre-stretch
3000 mm max wrapping height
Remote control
Photocell for dark loads
Mechanical system to brake roll containers
Safety fences
