Viverra Mobile Pallet Wrapper

Contact us for unbeatable quality and a low price on 01639 890609

The Viverra is the top level stretch-wrapping machine, with the most advanced technology, able to satisfy any stretch wrapping request

Parameter Adjustment from Touch Screen

• Number of wraps on bottom of pallet

• Number of wraps on top of pallet

• Robot rotation speed

• Independent upward and downward carriage speed

• Independent up and down film tension control adjustment

• Photocell delay for pallet overlapping

• Perimeter of product to be wrapped

Available Functions

• Partial wrapping up or down

• Full wrapping up and down

• Wrapping start from a preset height

• Reinforcing wrap in pre-set position

• Pallet height setting for photocell exclusion

• Wrapping with top sheet protection

• Diagnostic

• Monitoring the state of charge of battery on the touch screen

• Manual functions

• Capacity to store many custom programs

• Password setting to protect parameters

Easy

Feeler arm unit adjustable without any specific tool

Handy
For an easier and faster maintenance

Safe
Emergency system for quick stopping in case of obstacle within a radius of action of the robot

Carriage FE
With electromagnetic clutch installed on winding film roll which allows to adjust film tensioning from the control panel

Carriage PR
With geared rollers to pre-stretch film during unwinding. Stretch ratio available from 50 to 300%

Carriage PM
With rollers provided with gears and motorized for pre-stretching the film during its unwinding. Standard ratio pre-stretch 150% and available from 50 to 200%.An electronic control system adjustes the quantity of film required for the wrapping. Possibility to adjust the pre-stretch film ratio, from the control panel, to avoid breakage of the same

Battery Charger

• Hight frequency system with advance tecnology: -Efficiency > 85 % -

• Charging process fully controllod by microprocessor

• Automatic reset upon connection of a new battery

• Protection with an output relay against polarity inversions, short circuits, over-voltages or anomalies

• Alphanumeric signals of possible anomalies

• Compensation of the voltage drop on the cottecting cables to the battery

• Normally closed auxiliary contact to connected AC input line

Specifications

• Width 790

• Length 1670 mm

• Total height 2080 to 2850 mm

• Weight 400 Kg

• Power supply (battery charger) 110/240 Volt 50/60 Hz

• Battery for electric traction AGM 2 x 12 Vdc

• Hermetic battery without maintenance

• Machine speed Km/hr 1,8 ÷ 4,9

• Battery autonomy over 250 pallets

• Automatic detection of height of goods to be wrapped

Film Technical Specifications

• Stretchable film 15 – 35 um

• Internal reel-holding tube 76 mm

• Maximum external reel 300 mm

• Reel height 500 mm

• Maximum reel weight 16 – 20 Kg

Main Options

• Flashing lamp

• Stop of the machine in the same point where it started

• Feeler arn with larger or double wheel available in several solutions for very special loads

• Automatic cutting device end cycle

• Mast for pallet of 3200 mm height

• Other options are available on request